COR 20 – This pump is identical in physical size to the COR 15 but with the addition of an External power supply can push over 2000gph! All that flow for less than 100w of power and it is nearly silent. After deciding to do this larger, higher flow version, we thought to ourselves: Why not make this pump work standalone so even those without an Apex could use it and then later on get even more out of it by connecting it should they chose to purchase one? So that’s what we did! This COR 20 pump can be run by itself or connected to the Apex.
PHYSICAL DIMENSIONS: PUMP – 3.875”W x 4.875”H x 6.250”D
- CONNECTS TO ANY APEX WITH 7500 LPH)
- FOR INTERNAL OR EXTERNAL APPLICATIONS
- IQ-LEVEL SETS THE PROPER MIN AND MAX FOR YOUR AQUARIUM
- INCLUDES OVERSIZED 1.25 in. UNION
- ENERGY EFFICIENT – USES LESS THAN 90W OF POWER!
- INCREDIBLY QUIET!
- NO POWER BRICK MEANS CLEANER INSTALL COMPATIBLE WITH ALL APEX SYSTEMS
The COR uses the latest in Vector Control, BLDC motor technology. This drives the COR pump in a way that is both energy efficient as well as nearly vibration and noise free. Go ahead, we challenge you to find a quieter pump!
Snails, filter pads, or other foreign objects often find their way into a pump. Should the intake to your COR or any of your plumbing become significantly obstructed, the COR will alert you by flashing the LED on the driver. When the COR is connected to an Apex and the internet, it will send an alert to your mobile device as well.
INTERNAL TEMPERATURE MONITORING
The pump driver is continually monitoring the internal temperature of the COR pump motor. If it reaches an unsafe level, the driver will slow the pump down just enough to bring the temperature into an acceptable range while also providing you a notification. Some pumps shut off completely when they have a temperature issue, but the COR slows down so your tank will continue to circulate — giving you time to address the problem.
INTELLIGENT, QUIET, ENERGY EFFICIENT
Your return pump is by far the most important piece of equipment on your aquarium. It circulates the water which is basically the life-blood of a tank. Creating a great aquarium is just like building a great body – it all starts at the core – and this is precisely how our pump got its name!
The COR is a variable speed, brushless, DC-driven centrifugal water pump designed specifically for aquariums to be intelligent, energy-efficient, unbelievably quiet, and incredibly powerful for its size.
NO APEX NECESSARY!
The COR-20 does not require an Apex to operate. If you do not yet have an Apex don’t worry, much of its functionality is available from the button and LED interface on its driver. However, connect it to your Apex and it becomes the most intelligent and feature-rich aquarium pump on the market today!
COMPATIBLE WITH EVERY APEX
All COR pump models are fully compatible with every Apex system on the market. Simply connect the COR pump driver to any available AquaBus connection on your Apex system and then run the setup task in Apex Fusion. It’s that easy!
GREAT FLOW TO POWER RATIO
The COR-20 puts out great flow while at the same time being super-stingy on power making it friendly to you wallet and the environment! Be sure to plumb the COR-20 using the largest diameter pipe possible to get the best performance. We recommend at least 1.25″
The COR was built from the ground up with Apex controllability in mind. Control your pump output percentage, get real-time operational feedback from the pump, integrate it into complex feed routines, and monitor the status of the pump from anywhere in the world via Apex Fusion.
Connect the plumbing, plug the COR into its driver and plug it in a 1LINK port. With just a few button presses you will be able to set the pump flow rate and feed modes. A set up task will take you step by step through the entire install process.